November 17, 2026
Quick Steps to Remove Black Algae from Concrete Paths
By @andersonlpjw348
Dark, slippery patches on concrete paths can make walking outdoors hazardous, especially after rain. On the Mornington Peninsula, shaded gardens, coastal moisture and damp winters encourage biological growth. Removing it involves more than blasting away the visible stain: the right cleaner, careful scrubbing and better drainage help keep paths cleaner for longer.
Check the Surface Before You Start
What looks like black algae may actually be mould, lichen or another biological growth. Oily stains and tyre marks need different treatments. Biological growth commonly develops in damp, shaded areas and may feel slippery when wet, although appearance alone does not confirm its identity.
Check for cracks, loose concrete, decorative finishes and existing sealers. Test your cleaning method on a small, inconspicuous patch first, particularly on coloured, exposed-aggregate or sealed concrete.
Quick Steps to Clean the Path
- Clear and secure the area. Move furniture and pots, sweep away leaves and grit, and keep children and pets away. Wear gloves, enclosed non-slip shoes and eye protection.
- Plan for runoff. Protect nearby plants and prevent dirty water or cleaning chemicals from entering stormwater drains. Sweep up debris first and use barriers or recovery equipment where necessary.
- Apply an appropriate cleaner. Choose a product labelled for algae or biological growth on concrete. Follow its dilution, application and safety instructions exactly. Do not assume a stronger mixture works better.
- Allow the specified contact time. Give the cleaner time to work according to its label. Avoid applying it to hot concrete or immediately before rain unless the instructions specifically allow this.
- Scrub the affected patches. Use a stiff nylon-bristled brush, paying attention to textured areas and joints. Avoid wire brushes, which can scratch finishes or leave metal particles that rust.
- Rinse or leave to act as directed. Some products require rinsing; others are leave-on treatments. Follow the label and capture contaminated wash water. Once the surface dries, reassess any remaining staining before repeating treatment.
Never mix cleaning products. In particular, chlorine bleach must not be combined with acids, vinegar or ammonia because dangerous gases can form.
Should You Use a Pressure Washer?
Pressure washing can remove surface growth, but excessive pressure can erode concrete, expose aggregate and damage sealers. If the surface is suitable, start with a wide fan nozzle at a https://morningtonpeninsulapressurewashing.com.au/deck-cleaning/ low setting, test a discreet area and keep the nozzle moving at a consistent distance. Avoid concentrated pencil jets and spraying directly into cracks or damaged joints.
For fragile finishes, extensive growth or paths sloping towards stormwater drains, professional cleaning with suitable surface-cleaning and wastewater-recovery equipment is a safer option.
Help Prevent Black Growth Returning
Trim overhanging vegetation where practical, remove fallen leaves regularly and redirect sprinklers away from paths. Fix leaking taps and address pooling water rather than repeatedly treating the same damp patch.
A compatible concrete sealer may reduce water absorption and make maintenance easier, but it does not eliminate biological growth. Ask about suitability and slip resistance, especially on sloping paths and frequently wet areas.
When to Call a Mornington Peninsula Cleaning Service
Seek professional help when growth returns quickly, the path remains dangerously slippery or cleaning risks damaging decorative concrete. Ask the contractor how they identify the staining, protect surrounding gardens and manage wastewater. In Victoria, preventing cleaning chemicals and contaminated wash water from entering stormwater is an important environmental responsibility.

Mornington Peninsula Pressure Washing
(03) 8686 8331
❧